PENERAPAN KONSEP LEAN MANUFACTURING UNTUK MENDESAIN ULANG TATA LETAK FASILITAS DI INDUSTRI USAHA MIKRO KECIL MENENGAH

Authors

  • Setia Teguh Wirawan STIMA IMMI Jakarta
  • Adelina Suryati Universitas Panca Sakti Bekasi

DOI:

https://doi.org/10.53363/buss.v3i2.151

Keywords:

industry, layout, industri, UMKM, tata letak, lean manufacturing

Abstract

The aims of this study were to redesign the production floor layout with lean manufacturing in mind to eliminate waste and use the Block Layout Overview with Layout Planning (BLOCPLAN) algorithm to achieve a new facility layout in the Indonesian home food industry. One solution to address this problem is to improve work areas (work stations) on the production floor by rearranging and designing standard operating procedures (SOPs) using the concept of lean manufacturing. The new layout can reduce the loss from the actual condition. Practical implications This research is beneficial for small and medium enterprises (MSMEs) in Indonesia, especially the home food industry. The BLOCPLAN layout (as a recommendation) has a displacement moment with a 40 percent reduction. Production facility layout design is a method used to rearrange the production process area so that the distance between processes can be minimized. SOP is given as direction and supervision of workers to work according to standards. Originality/SOP design value can support the recommended layout as a reference in making cakes (products) to eliminate waste, namely movement (alternating production process flow) and length.

Downloads

Download data is not yet available.

References

AM, R. J., Arnellis, A., & Sriningsih, R. (2018). Optimasi Hasil Produksi Tahu dan Tempe dengan Metode Branch and Bound dan Metode Cutting Plane. Journal of Mathematics UNP, 3(1).

Choir, M., Arief, D. S., & Siska, M. (2017). Desain Ulang Tata Letak Fasilitas Produksi Menggunakan Metode Systematic Layout Planning Pada Pabrik Kelapa Sawit Sungai Pagar. Jom FTEKNIK, 4(1), 1–6.

Donoriyanto, D. S., Falah, Y., & Azhar, M. F. (2020). Analisis Waste Pada Aktivitas Lini Produksi Dengan Menggunakan Lean Manufacturing Di Pt Abc. Tekmapro: Journal of Industrial Engineering and Management, 15(1), 25–35.

Ghobadian, A., Talavera, I., Bhattacharya, A., Kumar, V., Garza-Reyes, J. A., & O’regan, N. (2020). Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability. International Journal of Production Economics, 219, 457–468.

Hartini, S., Wicaksono, P. A., Rizal, A. M. D., & Hamdi, M. (2021). Integration lean manufacturing and 6R to reduce wood waste in furniture company toward circular economy. IOP Conference Series: Materials Science and Engineering, 1072(1), 012067.

Khan, M. A., Marri, H. B., & Katri, A. (2020). Preliminary Study on the Identification, Analysis and Elimination of Lean Manufacturing Wastes through Lean Manufacturing Practices at Yarn Manufacturing Industry. Proceedings of the International Conference on Industrial Engineering and Operations Management, 10–12.

Leksic, I., Stefanic, N., & Veza, I. (2020a). The impact of using different lean manufacturing tools on waste reduction. Advances in Production Engineering & Management, 15(1).

Leksic, I., Stefanic, N., & Veza, I. (2020b). The impact of using different lean manufacturing tools on waste reduction. Advances in Production Engineering & Management, 15(1).

Mahendra, I. A. (2021). Usulan lean manufacturing guna meminimasi manufacturing lead time dan waste pada produk kecap manis sate PT. Korma Jaya Utama. SKRIPSI-2021.

Pattiapon, M. L., Maitimu, N. E., & Magdalena, I. (2020). Penerapan Lean Manufacturing Guna Meminimasi Waste pada Lantai Produksi (Studi Kasus: Ud. Filkin). Arika, 14(1), 23–36.

Pramesti, M., Subagyo, H. S. H., & Aprilia, A. (2019). Perencanaan Ulang Tata Letak Fasilitas Produksi Keripik Nangka Dan Usulan Keselamatan Kesehatan Kerja (Studi Kasus Di Umkm Duta Fruit Chips, Kabupaten Malang). Agrisociono-mics: Jurnal Sosial Ekonomi Pertanian, 3(2), 150–164.

Rahman, N. M., Prabaswari, A. D., & Nofita, S. (2020). Identifikasi Waste Pada Lini Produksi 220ML dan 330ML dengan Pendekatan Lean Manufacturing Pada Perusahaan XYZ.

Rahmanasari, D., Sutopo, W., & Rohani, J. M. (2021). Implementation of Lean Manufacturing Process to Reduce Waste: A Case Study. IOP Conference Series: Materials Science and Engineering, 1096(1), 012006.

Restuningtias, G., Sudri, N. M., & Widianty, Y. (2020). Peningkatan Efisiensi Proses Produksi Benang dengan Pendekatan Lean Manufacturing Menggunakan Metode WAM dan VALSAT di PT. XYZ. Jurnal IPTEK, 4(1), 27–32.

Rhohman, F., & Budiretnani, D. A. (2018). Optimalisasi Proses Produksi Tahu untuk Peningkatan Kesejahteraan Produsen Tahu. Jurnal Panrita Abdi, 2(2), 113–118.

Sodhi, H. S., Singh, D., & Singh, B. J. (2020). A conceptual examination of Lean, Six Sigma and Lean Six Sigma models for managing waste in manufacturing SMEs. World Journal of Science, Technology and Sustainable Development.

Somantri, A. R. (2021). Reduksi Waste untuk Meningkatkan Produktivitas pada Proses Produksi Bracket Roulet Gordyn Menggunakan Pendekatan Lean Manufacturing. Jurnal Riset Teknik Industri, 131–142.

Suhardi, B., Anisa, N., & Laksono, P. W. (2019). Minimizing waste using lean manufacturing and ECRS principle in Indonesian furniture industry. Cogent Engineering, 6(1), 1567019.

Downloads

Published

2023-06-18

How to Cite

Wirawan, S. T. ., & Suryati, A. . (2023). PENERAPAN KONSEP LEAN MANUFACTURING UNTUK MENDESAIN ULANG TATA LETAK FASILITAS DI INDUSTRI USAHA MIKRO KECIL MENENGAH. Bussman Journal : Indonesian Journal of Business and Management, 3(2), 567–577. https://doi.org/10.53363/buss.v3i2.151